The side parts of the y- axis are constructed in a specific sandwich design. It’s special design bring a high rigidity and ability to compensate on the vibration. Furthermore, the z-axis is also built with T-groove profile. Through this way, you will be able to get a higher flexibility to assemble different tools. The track of the three axis consists of recirculating ball bearing screw guides that enables precise and effortless traveling. All the axis are powered by effectual stepper motors and ball screws drives. Nevertheless, the x-axis is powered by two ball screws drives. All shafts are secured with assistance guide to protect the revolving. In additionally, the pre-stressed bedding ball screws drives match with the specific ball bearing to ensures a position and repeatability accuracy of +0.02 mm.

Thus, the treatment of wood, plastic, GFK/ CFK, Plexiglas, aluminium, brass, copper, aluminium composite material and so on is not a problem because of its design.

Controller
The Versatil 1250 comes with a 3–axis stepper motor control unit MC 400/C, 4 amp including USB-Controller. The power supply is 230V; 50Hz/60Hz

Software
The Versatil 1250 is shipped with NC-EAS(Y) 2.0 Controller / Operating Software and CAM 2.0D software as standard. Furthermore, the various import files are in the format of NC (G-Code), NCP (isel-format), HPGL (PLT-format), Autocad (DXF-format), Adobe IIlustrator (ai-format), Postscript (eps-format) and Sieb & Maier (drl-format).