CONTACT  US
Panamech Machinery Sdn Bhd
NO.14, LORONG SANGGUL 1C,
BANDAR PUTERI,
41200 KLANG,
SELANGOR DARUL EHSAN,
MALAYSIA.
Tel: 03-51617876/ 03-51618036
Fax: 03-51617136
Email:
info@panamech.com.my
 

Panamech (Penang) Sdn Bhd
SRI RELAU COMPLEX, UNIT 1-3-11,
PERSIARAN BUKIT JAMBUL 1,
11900 PENANG,
MALAYSIA.
Tel: 04-6451635 / 6438266  
Fax: 04-6451639

  

NC-EAS(Y) 2.0-Controller/Operating Software



The NC-EAS(Y) software is a program for controlling and operating CNC milling machines with three stepper motors. Command signals are sent via a parallel port (LPT) or a USB port to the power drivers and then to the built-in stepper motors of the CNC machine.

Furthermore, the program also reads and indicates the condition of the three limit reference-switches, the emergency STOP switch, the material height sensor or the tool-length sensor. Two command signals, independent of the other signals, are used for the switching on, with the aid of relays, of the mill spindle motor and the coolant pump.

Thus, the stepper motors are driven with the aid of an external EAS USB Controller which performs, among other tasks, the task of the timer, emits the heartbeat signal and the direction signals for driving the 4 stepper motors.

The NC-EAS(Y) software is user friendly which has an innovative graphic interface. All of the main functions have been equipped with their respective icons and shortcut keys. The CAD-similar interface of the software presents the working scope /area of the CNC machine, which includes all of the elements such as drawing data, material, zero point, park point or the display of the scan/measurement point.

The NC-EAS(Y) program is used for performing the following work:
• Milling
• Drilling / boring
• Foil cutting
• Engraving
• Height scan/measurement
• Drawing
• Processing into digital format
• Automation


 
Vesatil 2500 600 LBS FLAT BED CNC PURE

 

© 2010 PANAMECH MACHINERY SDN. BHD.